Missing Spec Photo

Obtain a photograph of the spec(shoe).
- Take sample shoe to small conference room
- Start up RC Photoware if not already up...
- Window should look like...
- Power on LightBox and Camera
- Select the On/Off button in the top left of the User Interface Window
- Select Preview(3rd button down on the left menu
- Physically adjust shoe to desired positioning
- Adjust Camera setting here if needed(For further assistance with camera settings, contact Liem Nguyen(Ext3217). or Miguel Chavez(Ext.3221)
- Select Snap button on the bottom of the left menu when ready
Select the image in the image list to the right side of the window by marking the Checkbox...
Confirm the image is as desired for the spec.
If accurate image, select Save As on the right menu...
In the Save As window select the first box if not already checked, which should be configured to save to the "P:\PhotosNew\" path...
The Prefix name should be the Spec Number of the sample.
- Select Save
The image will be listed in the P:\PhotosNew\ under the spec number entered for the spec image.

Article ID: 61, Created: 6/30/2017 at 11:35 AM, Modified: 6/30/2017 at 2:54 PM